Eaton 5P1500R vs APC SMT1500RM2UC: 1U or 2U Rack UPS?

Quick answer: Eaton 5P1500R is a 1U, 1440VA/1100W rack UPS with five battery-backed outlets and a 21.8-inch-deep chassis. APC SMT1500RM2UC is a 2U, 1440VA/1000W rack UPS with six battery-backed outlets and an approximately 18-inch chassis. Eaton provides 100W more rated output in one rack unit; APC is physically shallower and offers the SmartConnect/SmartSlot management ecosystem. Neither fits every network cabinet.

Start with the exact Eaton 5P1500R database record and APC SMT1500RM2UC record. Check SMT1500RM2UC retailer options when comparing purchase cost; the Eaton record currently has no confirmed affiliate purchase link.

Affiliate disclosure: This page may earn a commission from qualifying purchases through retailer links.

1U versus 2U: compare depth, not just height

Specification Eaton 5P1500R APC SMT1500RM2UC
Capacity 1440VA / 1100W 1440VA / 1000W
Topology / waveform Line interactive / sine wave Line interactive / sine wave
Rack height 1U 2U
Chassis depth 21.8 in 18 in
Listed weight 44.1 lb 63 lb
Battery-backed outlets 5 × NEMA 5-15R 6 × NEMA 5-15R
Input plug NEMA 5-15P NEMA 5-15P
Local communications USB HID and RS-232 USB and serial
Network management Optional network card SmartConnect and SmartSlot options

A shallow cabinet can have enough vertical space for a 1U UPS but still fail to accommodate its 21.8-inch chassis. Add clearance for rear power cords, cable bends, airflow and any mounting hardware. Conversely, a 2U APC needs more vertical space but is about 3.8 inches shallower. Measure the usable rack depth, not the external cabinet dimension.

Rack rails, shelf load ratings and lifting access also matter. The Eaton is listed around 44 lb and the APC around 63 lb. Neither should be supported by a shelf or rail kit that is not rated for the installed weight. For another shallow-rack alternative, the CyberPower CP1500PFCRM2U versus APC rack comparison examines a much shorter chassis.

The 100W advantage is useful only when the load needs it

Eaton’s 1100W rating exceeds APC’s 1000W by 100W, although both list 1440VA. For a rack measured at 650W during realistic peak use, that leaves 450W of rated headroom on the Eaton and 350W on the APC. This does not prove longer runtime: battery energy, efficiency, battery age and the actual load determine backup minutes.

Do not size a rack UPS from the sum of server power-supply labels. Measure normal and peak draw, including a PoE switch under a representative PoE load, then check both manufacturers’ runtime curves. A UPS sized only to avoid overload may not keep the network alive long enough for storage and servers to shut down.

Five outlets or six: map the actual rack

The Eaton has five battery-backed NEMA 5-15R receptacles; APC has six. A router, firewall, PoE switch, NAS and server already consume five. If a sixth independent device must remain powered, the APC outlet count can simplify the installation, subject to the total watt limit.

If using a rack PDU, confirm the UPS and PDU electrical ratings, connector fit, and approved distribution arrangement. A PDU can increase available receptacles but cannot increase the UPS watt capacity. Avoid using unapproved adapters or plugging one UPS into another.

Management is more important than a dashboard label

Eaton lists USB HID and RS-232 interfaces as standard on the 5P1500R, with network-card capability as an option. APC lists USB/serial shutdown capability, a SmartConnect Ethernet monitoring port and a SmartSlot for compatible accessories. A cloud monitoring portal is not the same as a local network shutdown protocol, and an optional card should not be assumed to be included.

Write down which host detects the outage, which machines it tells to stop, and how long the network must remain powered for those messages to reach the targets. For a NAS or hypervisor, test the entire shutdown sequence before treating either UPS as a reliable unattended protection system.

Availability and replacement-battery planning

Eaton provides an official 5P1500R product page with specifications and a channel-partner purchasing route. Its listed price is not a verified live reseller price. Schneider Electric labels SMT1500RM2UC non-stock in its distribution facility, which does not establish that every retailer lacks stock. Check the exact SKU and delivery terms rather than using an unverified price comparison.

Both are lead-acid systems with serviceable batteries. Compare replacement-battery part numbers, warranty eligibility, mounting hardware, optional network cards and expected labor. The less expensive initial UPS is not necessarily cheaper to own when the required accessory is missing.

Buying recommendation

  • Investigate Eaton 5P1500R if a 1U installation is required, the cabinet has more than 21.8 inches of usable chassis clearance plus cable space, and 1100W or Eaton’s USB-HID/management design solves a real requirement.
  • Investigate APC SMT1500RM2UC if the 18-inch chassis, sixth backed-up outlet or SmartConnect/SmartSlot environment is a better fit and the 1000W limit covers the measured load.
  • Pause the purchase if the rack depth, mounting kit, load curve or shutdown integration has not been verified. Compare the exact UPS specifications before choosing a vendor.

Common questions

Does 1U mean the Eaton fits a shallow rack?

No. The Eaton chassis is 21.8 inches deep. Its smaller rack height does not make it shallower.

Does 1100W mean the Eaton lasts longer?

No. Watt rating is a maximum supported output, not stored battery energy. Compare runtime graphs at the same measured load.

Is SmartConnect a built-in SNMP management card?

No. Treat cloud monitoring, SmartSlot expansion and supported network-management accessories as separate features; verify the exact hardware and license needed.

Primary specifications

Manufacturer references: Eaton 5P1500R product specifications and APC SMT1500RM2UC product page. Reviewed October 22, 2026. Availability and included accessories may change.

Similar Posts