APC BR1500MS2 vs BX1500M: Is Sine Wave the Difference?
Quick answer: Buy the BR1500MS2 when sine-wave output is important for your power supply or when you need six battery-backed AC outlets. The BX1500M is also rated 1500VA/900W but uses simulated-sine battery output and provides five battery-backed outlets. If those differences do not affect your equipment, compare current exact-model price and battery service costs.
These APC models have nearly identical capacity numbers, which makes it easy to treat them as substitutes. Their battery waveforms and outlet allocations make them meaningfully different purchases.
Check the exact models: BR1500MS2 on Amazon | BX1500M on Amazon. Prices, stock and sellers can change; confirm the model number before ordering.
Affiliate disclosure: As an Amazon Associate, UPSIndex may earn from qualifying purchases.
At a glance: exact-model specifications
| Specification | BR1500MS2 | BX1500M |
|---|---|---|
| Rated capacity | 1500VA / 900W | 1500VA / 900W |
| Topology | Line Interactive | Line Interactive |
| Battery output waveform | Sine Wave | Simulated Sine Wave |
| Total AC outlets | 10 | 10 |
| Battery-backed outlets | 6 | 5 |
| Surge-only outlets | 4 | 5 |
| Form factor | Tower | Tower |
Capacity and outlet counts are manufacturer-model specifications, not promises of runtime or live retailer availability.
For the full database entries, see BR1500MS2 and BX1500M. You can also compare both UPS models side by side using the UPSIndex comparison tool.
The 1500VA/900W rating is a tie
Both APC units are rated at 1500VA and 900W. Neither provides more watt headroom than the other. If your measured load is near 900W, neither should be selected without examining peak draw and the manufacturer’s runtime curve at that load.
The fact that two UPS units have the same output ceiling does not establish equal battery energy or runtime. Compare like-for-like watt points and check the battery’s condition; a UPS bought from older inventory may have a battery that needs attention even if the model itself remains supported.
Battery waveform is the clearest technical split
The BR1500MS2 belongs to APC’s sine-wave Back-UPS Pro lineup. The BX1500M uses a simulated-sine battery waveform. This distinction appears only when the UPS is running from battery; it is not a claim that normal utility power is continuously converted in either unit.
For an active-PFC desktop or a NAS power supply whose compatibility is uncertain, BR1500MS2 is the safer specification choice. If your devices are known to tolerate simulated sine wave, BX1500M can still provide useful line-interactive backup. Avoid turning a compatibility preference into a blanket assertion that every stepped-wave unit is unusable.
Six backed-up sockets versus five
The BR1500MS2 has ten AC outlets: six battery-plus-surge and four surge-only. BX1500M also has ten: five battery-plus-surge and five surge-only. One extra backed-up outlet may matter when the protected set includes a PC, monitor, router, modem, switch and NAS.
Count actual devices and allow for bulky plugs. A surge-only outlet is not an emergency-power outlet, so putting the router there can defeat the purpose of keeping the NAS reachable during an outage.
USB charging is not USB shutdown
BR1500MS2 lists USB-A and USB-C charging ports and has a UPS communication path for supported software. Do not infer that a phone-charging USB socket carries battery-status data. BX1500M also supports UPS monitoring via its designated data interface, but check the exact included cable and software requirements.
If the UPS protects a storage system, confirm your NAS can see on-battery and low-battery signals before treating shutdown as configured. For a single desktop, PowerChute may be enough; for a NAS and multiple computers, coordinated shutdown requires more planning.
Replacement batteries and service
UPSIndex’s imported model records identify APCRBC163 for BR1500MS2 and APCRBC124 for BX1500M. These are different cartridge identifiers, so do not order a replacement battery merely because both UPS units say 1500VA. Verify the current part and serial-number applicability with APC before purchasing.
Schneider Electric’s model pages indicate replacement batteries are available for both. Stock at a specific retailer can vary. The better long-term buy may be the model for which you can obtain genuine replacement batteries and support without unnecessary downtime.
Who should buy each model?
BR1500MS2 is easier to recommend for waveform-sensitive or uncertain equipment and for setups needing six battery-backed outlets. BX1500M makes sense for compatible loads when five backed-up outlets are enough and the exact-model offer is attractive.
If you are deciding between APC’s other 1500VA variants, also review APC BN1500M2 as a separate model. The most useful question is whether you need a sine-wave output, not simply which product has the newest-looking display.
Common buying questions
Are BR1500MS2 and BX1500M the same wattage?
Yes. Both are rated 1500VA/900W.
Which has sine-wave battery output?
BR1500MS2 is sine wave; BX1500M is simulated sine wave.
Can they use the same replacement battery?
Do not assume so. The imported database lists different APC replacement cartridge numbers; confirm the exact cartridge with APC.
Bottom line
BR1500MS2 justifies consideration through its sine-wave output and sixth battery-backed outlet, not through higher watts. BX1500M remains a practical choice for confirmed-compatible loads when those two differences do not matter.
Manufacturer references and verification
Technical ratings and model-specific features were checked against the BR1500MS2 manufacturer page and the BX1500M manufacturer page. UPSIndex uses exact-model specifications; retailer stock, revisions, battery cartridge compatibility and runtimes should be rechecked before purchase. Research reviewed October 8, 2026.
